I have a refurbished Lenovo Thinkcentre that I was running Truenas off of. Everything was working great, but it got hit with a power surge and after lots of trouble shooting it appears the motherboard is fried and I don’t trust my ability to soder and fix it.
No now I need to upgrade my setup. Wondering what is a good sub $300 computer I can order that will run Jellyfin, Immich, and a few light services off of? With Truenas you seem to need two SSDs. One to boot and one to run apps, so it seems like a mini PC will not work.
I have a seperate HDD drive bay with a few hdd’s in it full of shows and picture. Just need a PC to run my services.
I would prefer something I can order off Amazon or can be shipped quickly so I can get back up and running again.
Don’t go with ancient hardware if you are wanting energy efficiency
It consumes less energy than the other server cpus from intel that are generally available.
The CPU may not use too much power, but the chipset and all the supporting circuitry will. Supporting 4/8channel memory aint free. And RAM can use a ton of power too.
I can see it consuming a bit more, yes, but i didn’t measure it to know for sure.
Except the hardware itself is really old which means that the performance will be much lower and thus the CPU usage will be higher. The older systems also have much slower memory and bus speeds.
You would be much better buying a more modern consumer CPU since the performance boost will mean that the CPU utilization will be lower. Most workloads including Jellyfin do not benefit from tons of slow CPU cores. Things will work better the higher CPU and ram frequently you have.
Server CPUs are a poor choice outside of very specific applications
My E5-2667 v4 (8 cores, higher frequency) using almost nothing of energy while watching some asmr on freetube and responding:
Edit: it has a higher tdp than the 2650 v4, and has 16gb of ddr4 ram
11W is actually a lot lower than what I was expecting. It isn’t crazy efficient but it isn’t bad.
Are you sure it supports DDR4? The Intel spec page says it has a clock of around 2.5GHz with DDR3 memory
From dmidecode, DDR4:
Edit: Broadwell supports both DDR3 and DDR4, with some caveats
Handle 0x0073, DMI type 17, 40 bytes Memory Device Array Handle: 0x0070 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 72 bits Size: 8 GiB Form Factor: DIMM Set: None Locator: DIMM_B1 Bank Locator: NODE 1 Type: DDR4 Type Detail: Synchronous Speed: 2667 MT/s Manufacturer: Undefined Serial Number: A64010B5 Asset Tag: DIMM_B1_AssetTag Part Number: Rank: 1 Configured Memory Speed: 2400 MT/s Minimum Voltage: 1.14 V Maximum Voltage: 1.26 V Configured Voltage: 1.2 V Handle 0x0076, DMI type 17, 40 bytes Memory Device Array Handle: 0x0070 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 72 bits Size: 8 GiB Form Factor: DIMM Set: None Locator: DIMM_D1 Bank Locator: NODE 1 Type: DDR4 Type Detail: Synchronous Speed: 2667 MT/s Manufacturer: Undefined Serial Number: A6401009 Asset Tag: DIMM_D1_AssetTag Part Number: Rank: 1 Configured Memory Speed: 2400 MT/s Minimum Voltage: 1.14 V Maximum Voltage: 1.26 V Configured Voltage: 1.2 V