Looks like someone asked Ethan about posting to Lemmy, and they replied “Thanks for sharing – adding it to the list of places to post!”.

https://fosstodon.org/@shollyethan/114320289586655278

Unfortunately that’s one area I am bad with, I tend to use reverse_proxy for most such as Baikal running with the ckulka/baikal Docker image (which runs Nginx or Apache), otherwise I only static sites.

I’d start by looking at Baikal’s config for Apache and Nginx, https://sabre.io/baikal/install/ and comparing to the directives for Caddy, https://caddyserver.com/docs/caddyfile/directives and

Since it uses PHP, it will need that, https://caddyserver.com/docs/caddyfile/patterns#php

Upon my searches I came across this, it talks about running Baikal with Caddy specifically. https://github.com/caddyserver/caddy/issues/497

I hope that this provided some helpful directions.

I use Caddy for this. I’ll leave links to the documentation as well as a few examples.

Here’s the documentation for wildcard certs. https://caddyserver.com/docs/automatic-https#wildcard-certificates

Here’s how you add DNS providers to Caddy without Docker. https://caddy.community/t/how-to-use-dns-provider-modules-in-caddy-2/8148

Here’s how you do it with Docker. https://github.com/docker-library/docs/tree/master/caddy#adding-custom-caddy-modules

Look for the DNS provider in this repository first. https://github.com/caddy-dns

Here’s documentation about using environment variables. https://caddyserver.com/docs/caddyfile/concepts#environment-variables

Docker

A few examples of Dockerfiles. These will build Caddy with DNS support.

DuckDNS

FROM caddy:2-builder AS builder
RUN xcaddy build --with github.com/caddy-dns/duckdns

FROM caddy:2
COPY --from=builder /usr/bin/caddy /usr/bin/caddy

Cloudflare

FROM caddy:2-builder AS builder
RUN xcaddy build --with github.com/caddy-dns/cloudflare

FROM caddy:2
COPY --from=builder /usr/bin/caddy /usr/bin/caddy

Porkbun

FROM caddy:2-builder AS builder
RUN xcaddy build --with github.com/caddy-dns/porkbun

FROM caddy:2
COPY --from=builder /usr/bin/caddy /usr/bin/caddy

Configure DNS provider

This is what to add the the Caddyfile, I’ve used these in the examples that follow this section. You can look at the repository for the DNS provider to see how to configure it for example.

DuckDNS

https://github.com/caddy-dns/cloudflare?tab=readme-ov-file#caddyfile-examples

tls {
	dns duckdns {env.DUCKDNS_API_TOKEN}
}

CloudFlare

https://github.com/caddy-dns/cloudflare?tab=readme-ov-file#caddyfile-examples Dual-key

tls {
	dns cloudflare {
		zone_token {env.CF_ZONE_TOKEN}
		api_token {env.CF_API_TOKEN}
	}
}

Single-key

tls {
	dns cloudflare {env.CF_API_TOKEN}
}

PorkBun

https://github.com/caddy-dns/porkbun?tab=readme-ov-file#config-examples Global

{
        acme_dns porkbun {
                api_key {env.PORKBUN_API_KEY}
                api_secret_key {env.PORKBUN_API_SECRET_KEY}
        }
}

or per site

tls {
	dns porkbun {
			api_key {env.PORKBUN_API_KEY}
			api_secret_key {env.PORKBUN_API_SECRET_KEY}
	}
}

Caddyfile

And finally the Caddyfile examples.

DuckDNS

Here’s how you do it with DuckDNS.

*.example.org {
        tls {
                dns duckdns {$DUCKDNS_TOKEN}
        }

        @hass host home-assistant.example.org
        handle @hass {
                reverse_proxy home-assistant:8123
        }
}

Also you can use environment variables like this.

*.{$DOMAIN} {
        tls {
                dns duckdns {$DUCKDNS_TOKEN}
        }

        @hass host home-assistant.{$DOMAIN}
        handle @hass {
                reverse_proxy home-assistant:8123
        }
}

CloudFlare

*.{$DOMAIN} {
        tls {
	        dns cloudflare {env.CF_API_TOKEN}
        }

        @hass host home-assistant.{$DOMAIN}
        handle @hass {
                reverse_proxy home-assistant:8123
        }
}

Porkbun

*.{$DOMAIN} {
        tls {
	        dns porkbun {
			api_key {env.PORKBUN_API_KEY}
			api_secret_key {env.PORKBUN_API_SECRET_KEY}
	        }
        }

        @hass host home-assistant.{$DOMAIN}
        handle @hass {
                reverse_proxy home-assistant:8123
        }
}

Retroid Pocket Official(@Retroid0fficial) posted

10:21 AM ET · Feb 13, 2025 · 67.1K Views

It can be used as a VPN router, any VM that needs a VPN can be connected to a network bridge that is forward through the VPN. This could also be done on the primary router and a VLAN.

Thanks! Here they are listed below.

• HOT WHEELS™ - Fun Pack
• HOT WHEELS™ - Aston Martin DBS 2010
• HOT WHEELS™ - Hotweiler™
• HOT WHEELS™ - Mad Manga™
• HOT WHEELS™ - Chevy 1956
• HOT WHEELS™ - Night Burner™
• HOT WHEELS™ - Mattel Dream Mobile™
• HOT WHEELS™ - 2-Tuff™
• HOT WHEELS™ - Christmas Pack
• HOT WHEELS™ - Thanksgiving Pack
• HOT WHEELS™ - Bye Focal™ II

Oops, looks like that’s the wrong URL. I found it on Hacker News, here’s the post https://news.ycombinator.com/item?id=42431065 https://hostyourgif.live/

It says no such command found.

Make sure you use a back slash and not a forward slash. oobe\bypassnro

Copied the images as well as the comment containing information.

ConsciousFish6170: Idk why my description didn’t post. I put a raspberry pi 2 w inside a mostly gutted ps4 controller that wasn’t working anymore. Wanted to make the controller still look functional so I left the joy sticks but removed what I could to fit the pi. I have retro pi on it running nes, snes, ps1, gba, and n64 but n64 doesn’t seem to run great. I have two usb c mini adapters for the power supply and a USB hub. I was able to upload roms on a micro SD and put that into the USB hub to put roms on. I have only ever seen USB sticks and tried the micro SD because it was all I had. This is my first attempt at using raspberry pi and any kind of emulators.

It looks like they are working on fixing that with this pull request.

Is it https://tosdr.org/ ?

There’s also https://privacyspy.org/

I just checked myself and it’s card1 too, now I am curious why it’s not card0. 🤷

I believe it’s cat /sys/class/drm/card0/device/pp_power_profile_mode.

There’s also the power_dpm_force_performance_level.

I agree with this. I understand that the majority of users also don’t read release notes and some don’t even install add-ons, with this being enabled by default this would provide them with a more anonymous ad experience.

As a small homelabber I agree with this. I started with a baremetal and using Docker, and switched to Proxmox, and now over to Incus, actually currently I am using Debian with cockpit + cockpit-machines. I do like Incus, I keep hopping back and forth between cockpit, I need to settle on one.

That’s interesting! I wonder if they are locking down factory installations.

About a month ago I was able to do it with a fresh install of Pro in a VM, I’ll do a quick test and see if it works on Home…and it works too. I had to disconnect the network and then run the OOBE\BYPASSNRO command, it rebooted and gave me the continue without network and limited setup options.

Unless I missed something, the article states as follows

Another method of bypassing the account lockdown still exists. You simply have to enter OOBE\BYPASSNRO in the command prompt during the Windows 11 setup process, which allows you to skip the connection to the Internet and thus also the link to a Microsoft account.

I agree. I am someone who values their privacy and often does not like opt-out style analytics however I also know opt-in skews analytics. The way the searches are only categorized, and they are using Oblivious HTTP keeping IP addresses private makes me A-OK with this.

Yeah, Debian has older firmware found in the firmware-amd-graphics package which doesn’t include the firmware. You’ll need to download it from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/ I believe anything from linux-firmware-20231030 and newer should work.

20231030 tag: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/amdgpu?h=20231030 or newest(20240410) tag: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/amdgpu?h=20240410

These files need to be placed in /lib/firmware/amdgpu/

It’s a relatively low performance hit and it benefits me when having to replace a failing/old disk. I can just toss the drive without having to erase the data first, that is as long as the key is a secure length.